*FREE SHIPPING*
on all orders over $250

This means you do not pay
any extra fees no matter what.
 No Residential or Liftgate Fees!









 
 
 
     FOLLOW US...
           
 
 
 
 
 
 
 
 
 
 
 
 



You are here:Home > New Metal Forming > Combination Shear Brake and Roll
Sort By:
Page of 1
Baileigh SBR-4020, 40" 3-in-1 Shear, Brake, & Roll
Baileigh SBR-4020, 40" 3-in-1 Shear, Brake, & Roll
Our Price: $1,345.00

Baileigh Industrial's SBR-4020 combination shear, brake and roll has a very small floor plan that can be bench or stand mounted. It combines a metal shear, a press brake and a slip roll all into one machine making it perfect for those small sheet metal shops or garage shops with limited space.

The SBR-4020 can shear, brake, or roll up to 20 gauge mild steel and 16 gauge aluminum, with material that is up to 40 inches wide. The manual press brake can bend up to 90 degrees in sheet metal.  The upper beam of the press brake has hardened adjustable dies that allows the fabricator to make certain boxes and pans.  The manual metal shear can cut at full capacity across the entire width of the machine. The manual slip roll has hardened rolls with three wire grooves for small round stock. A back gauge is also included for repeatability.
Baileigh SBR-5220, 52" 3-in-1 Shear, Brake, & Roll
Baileigh SBR-5220, 52" 3-in-1 Shear, Brake, & Roll
Our Price: $1,995.00

The SBR-5220 manual press brake and shear also has a slip roll feature making this machine a combination 3-in-1 shear brake roll. This model has a maximum capacity of 20 gauge mild steel and 16 gauge aluminum over its entire 52 inch width.

The manual press brake has a hardened single-vee bottom die and the upper beam has removable and movable hardened finger dies.  The movable fingers are in varying widths so the operator can move them around to make boxes and pans in varying sizes.  The manual metal shear can cut 20 gauge mild steel across the entire width of the machine.  The bottom and top shear blades are hardened and reversible for long life.  The manual slip roll has hardened bottom and top roll and there are also three wire grooves to roll round rod.  Rolls can be formed to a minimum diameter of 1.7 degrees.
Baileigh SBR-5216, 52" 3-in-1 Shear, Brake, & Roll
Baileigh SBR-5216, 52" 3-in-1 Shear, Brake, & Roll
Our Price: $2,585.00

The SBR-5216 is unlike anything on the market, this shear roller brake has a massive 16 gauge mild steel capacity over its entire with of 52”. This one machine consists of a low production press brake, slip roll, and sheet metal shear.  The SBR-5216 is the most powerful 3-in-1 combination machine on the market and is offered at an economical price making it perfect for home shops, industrial art shops, and other facilities where small production runs don't justify dedicated individual machines.

The shear portion of the SBR-5216 has a spring loaded clamp that keeps the material from lifting up, which extends blade life and helps with cut quality. A blade gap adjustment, as well as a material guide is also included.  The manual press brake section has removable and movable top fingers. The bottom V-block die that is removable as well. The different fingers allow for many types of boxes and pans to be made. The rolls on the slip roll section are hardened for long life and have three wire grooves, in case wire forming is needed.  The back and top rolls are also adjustable to help with forming different thicknesses.
   
 
Metal Forming Catagories
Newsletter

Sign up for our newsletter: