You are here:Home > New Metal Forming > Corner Notchers
Sort By:
Page of 1
JET HN-16T Bench Hand Notcher Baileigh SN-F11-AN, Sheet Metal Corner Notcher Baileigh SN-F09-MS, Sheet Metal Corner Notcher
JET HN-16T Bench Hand Notcher
List Price: $1,193.00
Our Price: $979.00
You save $214.00!
Baileigh SN-F11-AN, Sheet Metal Corner Notcher
List Price: $6,225.00
Our Price: $5,129.00
You save $1,096.00!
Baileigh SN-F09-MS, Sheet Metal Corner Notcher
List Price: $12,137.00
Our Price: $9,999.00
You save $2,138.00!
JET’s high quality cast iron sheet metal notcher is ideal or any garage or sheet metal shop. It's compact design makes it perfect for on-site use. The cutting angle is fixed at ninety degrees and can notch up to 6” x 6” in one manual stroke. The SN-F11-AN pneumatic corner notcher from Baileigh Industrial is the great machine for making perfect corners in sheet metal.  The SN-F11-AN corner notcher has an 11 gauge mild steel capacity, so it can make quick work of most any job.  And like its hydraulically operated brother, the SN-F09-MS, the SN-F11-AN sheet metal notcher has blades that are fixed at 90°, ensuring a perfect notch every time.  An oversized table measuring 18” x 23.5” includes table guides, standard, to make production notches.

The 5” blades on the SN-F11-AN corner notcher can be flipped and resharpened many times for even more life and cost savings.  The SN-F11-AN air operated sheet metal notcher can run off of any air compressor that can put out between 90 and 115 PSI, which should allow this great tool to be used anywhere.   An operator controlled foot pedal controls the notching action on the SN-F11-AN.  At an operating pressure of 115 PSI the SN-F11-AN is capable of producing 50 strokes a minute with reduced stroke length.
The SN-F09-MS sheet metal corner notcher from Baileigh Industrial is the perfect machine for making those perfect corners in that just are not possible with hand tools.  This corner notcher has a 9 gauge mild steel capacity, so it can make quick work of most any job.  Because the SN-F09-MS has blades that are fixed at 90°, it ensures a perfect notch every time.  An oversized table measuring 27” x 23.5” includes table guides, standard, to make tough jobs even easier.

The 7-3/4” blades on the SN-F09-MS corner notcher can be flipped and resharpened many times for even more life and cost savings.  The SN-F09-MS hydraulic sheet metal notcher comes with a powerful 220V 3 phase motor for years of notching.  An operator controlled foot pedal controls the notching action on the SN-F09-MS.  The SN-F09-MS is capable of notching up to 50 strokes a minute.
Baileigh SN-F04-MS, Sheet Metal Notcher Baileigh SN-V04-MS, Sheet Metal Notcher
Baileigh SN-F04-MS, Sheet Metal Notcher
List Price: $12,651.00
Our Price: $10,419.00
You save $2,232.00!
Baileigh SN-V04-MS, Sheet Metal Notcher
List Price: $26,352.00
Our Price: $21,709.00
You save $4,643.00!
If you are looking for a little more capacity from your corner notcher, try the SN-F04-MS sheet metal corner notcher from Baileigh Industrial. The SN-F04-MS is great for making perfect corners in metal that are impossible with hand tools.  This corner notcher has a 6mm or 4 gauge mild steel capacity, so it can make quick work of most any job.  The SN-F04-MS corner notcher has blades that are fixed at 90°, ensuring a perfect notch every time. A 25.5” x 25.5” oversized working table includes table guides, for even more accuracy.

The SN-F04-MS sheet metal notcher has 8.5” long blades that can be flipped and resharpened many times for even more life and cost savings. The blades are also negatively raked to pull the material to the stops during the cut, for the most accuracy available.   The SN-F04-MS sheet metal notcher comes with a powerful 220V 3 phase motor for years of notching. With an operator controlled foot pedal the SN-F04-MS is capable of 15 strokes per minute.
Ever have odd angles that you need to notch out of sheet metal, something that will look totally whack when finished if not done right?  Enter the SN-V04-MS; this great machine is a 220 volt three phase hydraulic sheet metal notcher.  This notcher will cut notches from 30 to 140 degrees in mild steel up to 6mm in thickness and will do this at up to 15 strokes per minute.

The oversized 27” x 23.5” table includes table guides and miter blocks to ensure accurate notches every time. The SN-V04-MS sheet metal notcher has 8.5” long blades that are negatively raked to pull the material to the stops during the cut.  The blades can also be resharpened many times for even more life and cost savings.

Blade gap is adjusted with the use of hand wheels and the notching stroke is controlled by a foot pedal.