|
|
|
|
|
|
S-24N Stand for 24" SR-2024N
|
List Price: $198.00 Our Price: $155.25 You save $42.75!
|
|
|
|
|
|
|
|
|
|
|
|
|
S-36N Stand for 36" SR-2236N
|
|
|
|
|
|
|
|
|
|
|
|
|
S-50N Stand for 50" SR-1650N
|
List Price: $299.00 Our Price: $273.00 You save $26.00!
|
|
|
|
|
|
|
|
|
|
|
|
|
SR-5016M, 50" x 16 Ga. Manual Slip Roll
|
|
|
The SR-5016M slip roll has a forming width of 50" with a capacity of 16 gauge mild steel. This is a three roll machine with two driven rolls that are made of polished carbon steel offering years of reliable service. This is the perfect sheet metal tool to have in any HVAC shop or general fabrication shop when sheet metal forming is required.
|
|
|
|
|
|
|
|
|
|
SR-5016E, 50" x 16 Ga. Electric Slip Roll (1Ph. 110V)
|
|
|
The SR-5016E powered slip roll from Baileigh Industrial is the perfect roller for any HVAC shop or general fabrication shop when sheet metal forming 16 gauge or less mild steel is required. This slip roll has three forming rolls with a width of 51” and features two driven rolls for more power. Powered by 1hp 110V motor assures that this well thought out machine can operate anywhere.
|
|
|
|
|
|
|
|
|
|
SR-5016, 50" x 16 Ga. Electric Slip Roll (1Ph. 220V)
|
|
|
Every fabrication shop needs the ability to roll metal. The SR-5016 electric slip roll from Baileigh Industrial is a 50 inch roll former that can roll 16 gauge mild steel with ease. This is the perfect roller for any HVAC shop or general fabrication shop that like to save time and effort when rolling sheet metal. Powered by 1 hp 220 volt single phase motor controls the movement of the two driven roll and assures that the SR-5016 has enough power for any job in just about any location.
|
|
|
|
|
|
|
|
|
|
PR-413, 48" x 13 Ga. Plate Roll (2HP, 1Ph. 220V)
|
|
|
Do you currently have a slip roll but are constantly being bogged down when you need to form something a little thicker. That is where the PR-413 roll former comes in. This economical plate roll has the ability to handle up to 13 gauge mild steel over its whole 4’ length. This electrically driven plate roll is powered by a 2 hp 220 volt single phase motor allowing it to be used almost anywhere.
|
|
|
|
|
|
|
|
|
|
PR-514, 60" x 14 Ga. Plate Roll (2HP, 1Ph. 220V)
|
|
|
Baileigh Industrial sheet metal equipment has always offered great value in its line of machinery, and the PR-514 plate forming machine is no exception. The PR-514 is the perfect plate roll for small and medium rolling applications. This plate forming machine has a useful width of 5' and has a capacity of 14 gauge mild steel sheet metal.
|
|
|
|
|
|
|
|
|
|
PR-409, 48" x 9 Ga. Plate Roll (2HP, 3Ph. 220V)
|
|
|
The PR-409 single pinch hydraulic plate roll from Baileigh Industrial is a great roll former that can form 9 gauge mild steel to a 7” ring on its full length of 4’. The PR-409 is operated entirely by an industrial grade hydraulic system. A 2 hp 220 volt three phase motor controls the system which runs the movement of the back roll as well as the rolling of all three forming rolls.
|
|
|
|
|
|
|
|
|
|
PR-510, 60" x 10 Ga. Plate Roll (2HP, 3Ph. 220V)
|
|
|
A long time staple of Baileigh Industrial’s sheet metal roll forming equipment line, the PR-510 has a bending capacity of 10 gauge mild steel at its full width of 5'. The PR-510 sheet metal forming plate roller has 4-3/4" OD rolls that are hardened and then polished to ensure no marring to the material being rolled. This plate roll is built to last and has a very rigid frame made from fully welded plate steel.
|
|
|
|
