This 1,300 lb. heavy-duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives. The hood comes standard with a 5" dust port for easy attachment to any dust collection system. The cutterhead is complete with four high speed steel knives and turns at 4,800 rpm producing 19,200 cuts per minute. The anti-kick back fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. The well designed infeed and outfeed rollers are fitted with roller bearings for long roller life. The sectional infeed and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed roller facilitates both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. You may easily raise the massive ribbed cast iron, ground finished table 1 /16 with each turn of the hand wheel. The model 201 is available with a 7-1 /2 horsepower, 3-phase or single-phase motor. This planer is perfect for the small to medium shop with continuous planing requirements.

• Part Number 1791261
• Maximum Planing 22 "
• Maximum Planing Thickness 9¼ "
• Maximum Depth of Cut 3/16 "
• Minimum Planing Length 10 "
• Cutterhead Diameter 3¼ "
• Cutterhead Speed 4800 RPM
• Cuts Per Minute 19200
• Feed Rate 20 and 30 FPM
• Outfeed Roller Diameter 3 "
• Number of Knives 4
• Table Size 32 1/4" x 24"
• Dust Port Diameter 5 "
• Dust Collection Minimum CFM Required 900 cu.ft/min
• Bed Rollers Adjustable from Front 2"
• Segmented Infeed Roller Diameter 3 "
• Table Height Adjust Manual 1 Turn = 1/16"
• Table Support 2 column
• Tool Supplied tool kit
• Number of Speeds 2
• Motor Power 7½ HP
• Motor Phase 1 Ph
• Motor Voltage 230 V
• Model Number 201
• Brand Powermatic
• Overall Dimensions 42 x 49 x 59
• Height 59 inch
• Width 49 inch
• Length 42 inch
• Net Weight 1350 pound

WARRANTY AND SERVICE:  

JPW Inc. warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Inc. Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.