The spindle is supported by double row taper roller and thrust ball bearings at the nose, with thrust and radial axis bearings at the top. Electrical circuits are located in the built-in control box at the rear of the arm- this keeps the controls dust and humidity free while making them easily accessible for maintenance.

• Part Number 320038
• Motor 7-1/2 HP, 230/460V, 3 Ph, Prewired 230V See 320039 for 460V unit
• Number of Spindle speeds 12 (40 - 1920)
• Spindle Taper 5 MT
• T-Slots Number and Size (in.) 3 & 7/8
• Column Diameter (in.) 17
• Drilling Capacity Cast Iron (in.) 2-7/8
• Drilling Capacity Mild Steel (in.) 2-1/2
• Tapping Capacity Cast Iron (in.) 2-3/8
• Tapping Capacity Mild Steel (in.) 2
• Boring Capacity Steel (in.) 5
• Boring Capacity Cast Iron (in.) 7-3/8
• Distance Column to Spindle (max/in.) 63
• Distance Column to Spindle (min/in.) 17
• Travel of Head Horizontal (in.) 49-5/8
• Distance Base to Spindle (max/in.) 63
• Distance Base to Spindle (min/in.) 13
• Arm Travel Vertical (in.) 50
• Quill Travel (in.) 14-9/16
• Quill Travel w/ Powerfeed engaged (in.) 13
• Quill Down feed Rates (IPR) 6 (.003 - .038 IPR)
• Elevating Motor 2 HP
• Base Dimensions (in.) 97-5/8 X 41-11/32 X 8-1/4
• Coolant Pump Motor 1/2 HP
• Machine Height from Floor (in.) 124-58/64
• Table Dimensions (in.) 27-7/8 X 19-5/8 X 15-3/4
• Clamping Motor 1 HP
• Model Number J-1600R
• Brand Jet
• Overall Dimensions 116 x 55 x 112
• Height 112 inch
• Width 55 inch
• Length 109 inch
• Net Weight 11000 pound

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools.