The new model JWS-25X Shaper features a powerful 3HP motor with magnetic controls. The large 25”x 25-1/2” precision ground cast iron table provides plenty of support. Safe, easy cutter set up is assisted by a positive detent spindle lock. The independently adjustable left and right fence has a built in 4” dust port.

• Part Number 708309
• Spindle Speed 7500 and 10,000 RPM
• Reversable Yes
• Spindle Diameter 1/2 and 3/4 "
• Spindle Size Under Nut 1/2 (2 13/64) and 3/4 (3 3/16) "
• Spindle Travel 3 1/2
• Tilting Spindle n.a.
• Table Size 25 x 25 1/2 "
• Table Height From Floor 33 "
• Table T-Slot 3/4 x 3/8 "
• Table Opening Diameter 6 9/32 "
• Table Insert Opening Diameter 2 9/16 and 4 21/64 "
• Fence Size (L x H) 14 1/2 x 4 3/4 "
• Fence Travel (Major and Minor) 4 1/4 and 15/16 "
• Table Inserts 2
• Maximum Diameter Cutter Below Table 6 "
• Maximum Diameter Cutter Above Table 7 "
• Router Bit Collet Diameter 1/4 and 1/2 " (optional)
• Dust Port Outside Diameter 4 "
• Dust Collection Minimum CFM Required 350 cu.ft/min
• Electrical Controls - Magnetic Starter Yes
• Digital Readouts n.a.
• Motor Power 3 HP
• Motor Voltage 230 V
• Prewired Voltage 230 V
• Motor Current 16 A
• Motor Phase 1 Ph
• Model Number JWS-25X
• Brand Jet
• Height 23 inch
• Width 25 inch
• Length 43 inch
• Net Weight 331 pound

WARRANTY AND SERVICE

JPW Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools.