Home > New Metal Forming >

Baileigh RDB-050, Manual Rotary Draw Bender

Baileigh RDB-050, Manual Rotary Draw Bender
 
List Price: $2,837.99
Our Price: $2,088.90
You save $749.09!


Free Shipping
Availability:: Usually Ships in 1 to 2 Business Days
Product Code: 1006768
Qty:

Description Technical Specs
 
The most unique feature of the RDB-050 is that it has three selectable bending speeds. The proper speed for each application depends on the material type, OD and wall thickness. Speed one (4 degrees per pull) has the most torque and would be used for bending 2" OD Chromalloy or 2-1/2" OD mild steel. Speed two produces 8 degrees (for intermediate materials), while speed three produces 12 degrees (for lighter gauge materials) with each pull. Also, the RDB-050 can bend in one shot without having to stop and reset the machine

The RDB-050 manual tube bender has no dis-assembly or assembly needed to produce a bend. Simply walk up to the RDB-050 and put your tubing into the hook arm insert and begin bending. When the bend is complete, return the machine to the home position and pull your bend out, or position it for the next bend. The RDB-050 tube bender can bend up to 200 degrees and an anti spring back mechanism holds each bend in place as the operator ratchets forward.

All pivot points on the RDB-050 utilize aluminum bronze bushings and thrust washers, for long life. The hook arm has quick release inserts to assist when changing over the machine to a different size of tubing. A complete changeover should take no more than one minute.

The RDB-050 comes complete with the stand, bend handle and degree dial.  Just add tooling and you are ready to bend tube.
Features
  • Dies available for 90 or 180 degrees
  • Replaceable bronze bushings at all pivot points
  • Four bending speeds
  • 180 degree bends without repining the die
  • Anti-spring back mechanism included
  • Integrated degree dial included
  • Quick change hook sleeve inserts, no u-straps

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

New Metal Forming
New Metal Forming > Tube & Pipe Benders


JET CS-315-1, 315mm Ferrous Manual Cold Saw (1 Ph. 230V) $3,848.90
Powermatic OES9138B Oscillating Edge Sander (1 Ph., 230V) $7,974.00
Baileigh DBG-106, Combination Belt & Disc Grinder $2,044.90
JET IBG-8VSB, 8" Industrial Variable Speed Bench Buffer (8" x 1" Wheel, 1HP) $626.94
Baileigh CS-275EU, Manual Cold Saw $3,276.90
Powermatic DT45 Dovetailer (1HP, 1PH, 230V, Manual Clamping) $6,709.00
JET JTJ-5ST, 5-Ton Toe Jack $502.70
SuperMax 25-50 Drum Sander w/ Closed Stand $2,895.00