The POWERMATIC® DT45 manual dovetail machine is used to cut dovetails for drawers and various furniture components. The machine is equipped with a router spindle which allows cutting dovetails of adjustable height. The DT45 can machine four types of dovetails with different pitches. Locking and unlocking of pieces takes place manually by an eccentric clamp.

• Part Number 1791304
• Motor Power 1 HP
• Motor Phase 1 Ph
• Motor Voltage 115 V
• Prewired 115 V
• Minimum Work Piece Size (L x W) 7 7/8 x 2 3/8"
• Maximum Work Piece Size (L x W) 31 x 11"
• Minimum Dovetail Height 3 "
• Maximum Dovetail Height 3 "
• Minimum Front Thickness 9 "
• Maximum Front Thickness 1 "
• Minimum Side Thickness 9 "
• Maximum Side Thickness 1 "
• Number of Spindles 1
• Spindle Speed 18500 RPM
• Center to Center Dovetail Spacing 1, 1 1/2, 2 and 2 1/2"
• Table Height From Floor 35 "
• Dust Port Diameter Outer Dimension 2 1/2, rear 4"
• Dust Collection Minimum CFM Required 500 cu.ft/min
• Model Number DT45
• Brand Powermatic
• Overall Dimensions 33 x 33 x 61
• Height 61 inch
• Width 33 inch
• Length 33 inch
• Net Weight 320 pound

WARRANTY AND SERVICE

JPW Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.