This 1,300-pound heavy duty cast iron planer offers rock solid rigidity and accurate planing for years to come. The hinged top allows easy access to the rollers and knives, and has a 5” dust port for easy attachment to any dust collection system. The cutterhead is a helical design with 150 four sided knife inserts – these produce a superior finish and much quieter operation compared to conventional cutterheads, and the inserts are installed without further adjustments.

The anti-kickback fingers and pressure bar are located in close proximity to the cutterhead for an exceptional finish. Infeed and outfeed rollers are fitted with roller bearings for long life. The sectional infeed roller and chip breaker are specially designed to allow multiple boards to be planed at the same time. The adjustable bed rollers facilitate both rough and finish planing. The solid steel outfeed roller is machined with small serrations to insure a smooth finish yet provide positive feeding. The two-speed gearbox with machined detents is quickly changed up front when switching from rough to finish work. The massive, ribbed cast iron table is ground finished and rises smoothly via the hand wheel. With a hefty 7-1/2 horsepower motor, the 201HH Planer is perfect for the small to medium shop with continuous planing requirements.

• Part Number 1791267
• Maximum Planing 22 "
• Maximum Planing Thickness 9¼ "
• Maximum Depth of Cut 3/16 "
• Minimum Planing Length 10 "
• Cutterhead Diameter 3¼ "
• Cutterhead Speed 4800 RPM
• Feed Rate 20 and 30 FPM
• Infeed Roller Diameter 3 "
• Outfeed Roller Diameter 3 "
• Number of Knives 150 Four-sided inserts
• Table Size 32 1/4" x 24"
• Dust Port Diameter 5 "
• Dust Collection Minimum CFM Required 900 cu.ft/min
• Blade Size 59/100" x 59/100" x 1/10"
• Bed Rollers Adjustable from Front 2"
• Segmented Infeed Roller Diameter 3 "
• Table Height Adjust Manual 1 Turn = 1/16"
• Table Support 2 column
• Tool Supplied tool kit
• Column Diameter 2½ "
• Maximum Height of Rollers Parallel to Tabletop 0.05 "
• Number of Speeds 2
• Motor Power 7½ HP
• Motor Phase 1 Ph
• Motor Voltage 230 V
• Model Number 201HH
• Brand Powermatic
• Overall Dimensions 42 x 49 x 59
• Height 59 inch
• Width 49 inch
• Length 42 inch
• Net Weight 1350 pound

WARRANTY AND SERVICE

JPW Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.