JET's new Electronic Variable Speed model EVS-1440B is engineered to maximize your shop’s output. The D1 4 Spindle is precision ground for accuracy and supported by class 7 tapered roller bearings capable of a run out maximum of .0004’’. The 2 speed gearbox allows operators to easily work at low speeds from 40 to 365 RPM and at high speeds from 220 to 2,000 RPMs

• Swing Over Bed (In.): 14
• Swing Over Cross Slide (In.): 9-1/16
• Swing Through Gap (In.): 19- 1/2
• Length of Gap (In.): 9-1/2
• Distance Between Centers (In.): 40
• Spindle Bore (In.): 1-1/2
• Spindle Mount: D1-4
• Number of Spindle Speeds: Variable
• Range of Spindle Speeds (RPM): 40-2000
• Spindle Taper with Sleeve: MT-5
• Number of Longitudinal and Cross Feed Rates: 25
• Range of Longitudinal Feeds (IPR): 0.0016-0.0460
• Range of Cross Feeds (IPR): 25
• Number of Inch Threads: 34
• Range of Inch Threads (TPI): 2-56
• Number of Metric Threads: 34
• Range of Metric Threads: 0.5-12
• Max Tool Size (In.): 3/4 x 3/4
• Compound Slide Travel (In.): 3-1/2
• Cross Slide Travel (In.): 7
• Tailstock Spindle Travel (In.): 6-1/8
• Taper in Tailstock Spindle: MT-3
• Follow Rest Capacity (In.): 0.35 - 2.2 Cooper Shaft (standard ) 0.393 - 2 Bearing Roller(OP)
• Steady Rest Capacity (In.): 0.23-0.61 Copper Shaft ( Standard) 0.20-2.36 Bearing Roller(OP)
• Width of Bed (In.): 7.48
• Motor (HP): 3HP, 230/460V, 3Ph
• Overall Dimensions (L x W x H) (In.): 68.5 x 28.3 x 50
• Shipping Dimensions (L x W x H) (In.): 76 x 30 x 61

JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools.