Finally, a production class Dual Drum Sander that is loaded with features. This machine features a 5HP motor to power the twin poly V-belts. The dual steel drums have a hard durometer rubber coating to assure a flat, mar free finish. Independently adjustable rear drum makes fine tuning easy. A heavy cast iron table incorporates four solid jackscrews with chain drive timing to keep it level at all times. The heavy-duty poly conveyor belt provides a positive grip on the stock. The 1/4HP feed motor is coupled to a two-speed forward/reverse gearbox that will sand 8 and 12 surface feet per minute. The heavy steel cabinet provides years of vibration free sanding, with plenty of storage space underneath.

• Two speed gear box
• Dual 4" dust ports
• Sandpaper on drums
• Tool kit
• Part Number 1791290
• Maximum Board Width 25
• Minimum Board Length 9 "
• Maximum Board Thickness 5¼ "
• Minimum Board Thickness 1/32 "
• Drum Diameter 6 "
• Sanding Drums (number of drums) 2
• Drum Length 25 "
• Drum Speed 1700 RPM
• Conveyor Motor 1/4 HP
• Dust Port Outside Diameter 4 "
• Dust Collection Minimum CFM Required 600 cu.ft/min
• Electrical Controls - Magnetic Starter 230 V Magnetic
• Motor Power 5 HP
• Motor Voltage 230 V
• Motor Phase 1 Ph
• Model Number DDS-225
• Brand Powermatic
• Overall Dimensions 43 x 44 x 43
• Height 43 inch
• Width 44 inch
• Length 43 inch
• Net Weight 730 pound

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.