The POWERMATIC® DT65 Single Spindle Dovetailer gives quality to the most popular joints of drawer construction. It provides an affordable way to produce cleanly cut, professional dovetails that will enhance your products. The DT65 is complete with 1HP 230V 1 phase motor, pneumatic clamping, magnetic starter, carbide tipped cutter, and a four-sided template that produces dovetails on 1", 1-1/2", 2", and 2-1/2" centerlines. The use of different dovetail centerlines gives a unique custom appearance.
- Part Number 1791305
- Motor Power 1 HP
- Motor Phase 1 Ph
- Motor Voltage 230 V
- Minimum Work Piece Size (L x W) 7 7/8 x 2 3/8"
- Maximum Work Piece Size (L x W) 59 x 16 1/2"
- Minimum Dovetail Height 3 "
- Maximum Dovetail Height 3 "
- Minimum Front Thickness 9 "
- Maximum Front Thickness 2 "
- Minimum Side Thickness 3 "
- Maximum Side Thickness 1 "
- Number of Spindles 1
- Spindle Speed 18500 RPM
- Center to Center Dovetail Spacing 1, 1 1/2, 2 and 2 1/2"
- Table Height From Floor 45 "
- Dust Port Diameter Outer Dimension 2 1/2, rear 4"
- Dust Collection Minimum CFM Required 500 cu.ft/min
- Model Number DT65
- Brand Powermatic
- Overall Dimensions 37 x 44 x 63
- Height 63 inch
- Width 44 inch
- Length 37 inch
- Net Weight 420 pound
WARRANTY AND SERVICE
JPW Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.
|
