Home > New Metal Forming >

Baileigh SR-5016, 50" x 16 Ga. Electric Slip Roll (1Ph. 220V)

Baileigh SR-5016, 50" x 16 Ga. Electric Slip Roll (1Ph. 220V)
 
List Price: $8,311.26
Our Price: $6,695.00
You save $1,616.26!


Free Shipping
Availability:: Usually Ships in 1 to 2 Business Days
Product Code: 1007306
Qty:

Description Technical Specs
 
Every fabrication shop needs the ability to roll metal.  The SR-5016 electric slip roll from Baileigh Industrial is a 50 inch roll former that can roll 16 gauge mild steel with ease.  This is the perfect roller for any HVAC shop or general fabrication shop that like to save time and effort when rolling sheet metal.  Powered by 1 hp 220 volt single phase motor controls the movement of the two driven roll and assures that the SR-5016 has enough power for any job in just about any location.

The upper portion of main frame of the SR-5016 electric slip roll is made from solid plate steel that has been precisely machined to be the same on the left and right sides of the machine.  This keeps all three rolls in perfect alignment during the bending process.  The all steel lower base of the SR-5016 is integrated into the uprights and is fully welded for rigidity.

The SR-5016 electric slip roll uses a foot pedal for both left and right rolling applications and has integrated emergency stops to help maintain a safe workplace.  If wire rolling is needed, the SR-5016 also comes with three wire grooves.
Features
  • 50" Forming width
  • 16-gauge mild steel capacity
  • Electric powered
  • 1HP, 1 Ph., 220V motor
  • 3-wire grooves
  • Foot pedal operated
  • Integrated emergency stop
  • 2" back roll adjustment

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

New Metal Forming
New Metal Forming > Slip Rolls


JET JCDC-1.5 Cyclone Dust Collector (1.5 HP, 1 Ph., 115V) $1,836.99
JET J-2550, 20" Floor Model Step Pulley Drill Press (1 HP, 1 Ph., 115/230V) $2,415.00
JET VBS-2012, 20" Vertical Metal Bandsaw (2HP, 3Ph, 230/460V) $12,813.90
JET "Trademaster Series" Electric Chain Hoists $3,804.90
JET IBG-8VS, 8" Industrial Variable Speed Bench Grinder (8" x 1" Wheel, 1HP) $764.50
Powermatic Model 511 Panel Saw (3 HP, 1 Ph., 115V) $9,029.00
Laguna 18|BX, 18" Bandsaw (3-HP, 1 Ph., 220V) $3,145.00
Baileigh CS-350EU, Circular Cold Saw $6,352.50
JET SLT-330F, Scissor Lift Table with 330-lb. Capacity $431.19