This 8-inch jointer meets the demand for accuracy while combining unique, user-friendly functions. The infeed table lever can be used to rapidly position table height, then the handle rotated for fine-adjustment of cut depth. Fence tilting is accomplished by a worm gear system, smoothly operated by a simple handwheel. The tables provide 73” long extended support. A non-mar insert in the fence protects the table from scratches during adjustments. The jointer is available with a three knife cutterhead, or a helical cutterhead with four-sided knife inserts. The operating switch is high mounted for easy reach, and the push blocks have a magnetic base - store them on any metallic surface for instant access.

• Number of Knives: 54 inserts
• Helical Knife Size (L x W x T) (In.): 15" x 15" x 2.5"
• Cutterhead Speed (RPM): 7,000 RPM
• Cutting Capacity (W x D) (In.): 8" x 1/2"
• Table Size (L x W) (In.): 73" x 8-1/2"
• Table Height from Floor (In.): 32"
• Infeed Table Length (In.): 35-1/4"
• Outfeed Table Length (In.): 35-1/2"
• Fence Size (L x H) (In.): 38" x 4-3/4"
• Fence Tilt (Deg.): 45 Forward, 45 Backward
• Fence Positive Stops (Deg.): 45, 90, -45
• Dust Collection Minimum CFM Required (CFM): 450 CFM
• Dust Port Outside Diameter (In.): 4"
• Motor Power (HP): 2 HP
• Motor Phase: 1 Ph.
• Motor Voltage (V.): 230V only
• Motor Current (Amps): 9
• Recommended Circuit Size (Amps.): 20
• Shipping Weight: 485 Lbs.

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.