Home > New Metalworking > Cold Saws >

Baileigh CS-355SA, Semi-Automatic Cold Saw for Non-Ferrous Metals

Baileigh CS-355SA, Semi-Automatic Cold Saw for Non-Ferrous Metals
 
List Price: $19,943.00
Our Price: $15,717.90
You save $4,225.10!


Free Shipping
Availability:: Usually Ships in 1 to 2 Business Days
Product Code: BA9-1002591
Qty:

Description Technical Specs
 
When cutting non-ferrous material, such as aluminum or copper, you need a high speed cut off saw to ensure a great cut every time.  The CS-355SA semi-automatic high speed cut off saw from Baileigh Industrial is a great choice because of the 220 volt three phase, 5.5hp high speed motor that turns 3200 RPM, which is perfect for cutting those soft metals known for gumming up blades. The CS-355SA has a maximum capacity of 4-1/4” round at 90 degrees, and the ability to miter from 45 degrees to the right to 90 degrees on the left, this is the perfect saw for any shop.

Operation of the CS-355SA semi-automatic cut off saw could not be easier, simply place the material in the vise and push the foot pedal.  The vise will clamp the material; the blade will start up and lower itself cutting the material.  Once the cut is complete the blade will shut off and the head will raise back up.  This process saves time and effort of the operator and will also make the shop more efficient as well as prolong blade life due to the consistent decent speed.

The CS-355SA’s motor drives a belt to achieve maximum RPMs as quickly as possible with few moving parts to break down.  A self centering vise also comes standard on the CS-355SA, so there are no changes to make when changing diameters of tube or pipe. So the material is securely held in place there is a jaw on both the left and right sides of the blade.  A flood coolant system is also included to help with the quality of cut.
Features
  • 5.5 HP, 220 volts, 3 phase power.
  • Miter from 45 degrees to the right to 90 degrees on the left.
  • Capacity of 4-1/4” round at 90 degrees.
  • High speed motor that turns 3200 RPM
  • Self centering vise.
  • * Blade not included.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

New Metalworking > Cold Saws
New Metalworking


Powermatic WB-25, 25" Wide Belt Sander - 15HP, 3PH, 230/460V, with DRO $18,995.95
JET J-FK350-2K, 350mm Ferrous Manual Cold Saw (3Ph. 230V) $8,578.90
Baileigh BG-260-3-110, 2" x 60" 3-Wheel Belt Grinder $4,156.90
Baileigh CS-C485SA, 17" Vertical Column Semi-Automatic Cold Saw $32,888.90
Baileigh ATM-27-1900 - Pneumatic Tapping Arm $6,840.90
Powermatic SLR12, Straight Line Rip Saw (15 HP, 3 Ph, 230V/460V) $23,264.00
JET JPS-10, 10" ProShop Table Saw (1.75HP, 1Ph, w/ 52" Rip & Steel Wings) $2,199.99
JET J-CK350-2K, 350mm Non-Ferrous High Speed Manual Cold Saw (3Ph. 230V) $8,831.90
Powermatic PM1250 Micro-Dust Air Filtration System $660.00