Home > New Metal Forming >

Baileigh R-M20, Roll Bender (110V or 220V)

Baileigh R-M20, Roll Bender (110V or 220V)
 
Rolling coils is one of the hardest thing to do in metal forming.  This is where the R-M20 comes in and makes easy work of the job.  The R-M20 from Baileigh Industrial is the perfect Ring and Angle Roll Bender for doing small diameter material or coils because of its tight compact roll formation.  Lateral guides are also adjustable, making it easy to bend just about any width coil imaginable.  Rolling operation on the R-M20 is done via a set of foot pedals for forward and reverse roll direction.  An emergency stop is also integrated for safety.  An easy to read digital display, shows the top roll position to make repeatability a snap.

Like all Baileigh Industrial roll benders the R-M20 is built to last and includes a rugged steel frame and hardened ground and polished high strength steel shafts.  The R-M20’s head can be removed from the included stand to make this roll bender portable.  This would be especially important if going to a job site or just to have extra room in the shop.  Another nice feature of the R-M20 is that it is available in both 110V and 220V three phase, allowing anyone form someone working out of their garage to a big industrial fabricating shop.

Item# Item Name List Price Our Price Sale Price Qty Add
1006849 Baileigh R-M20-110 , Roll Bender (110V)
$8,284.20
$6,545.00
1006850 Baileigh R-M20-220, Roll Bender (3 Ph. 220V)
$7,513.87
$5,498.90
$ 4,895.00
Check the items you wish to purchase, then click


Features:
  • Heavy duty steel frame
  • Ground and heated treated shafts
  • Foot pedal operation
  • Emergency stop
  • Digital display for top roll
  • Gear driven
  • 110V (or 220V, 3-phase available)
  • Stand included




Technical Specs:
  • Driven Rolls: 2
  • Roll Adjustment: Manual
  • Pipe Capacity: Size: .5” (sch.40) / Min. Dia.: 14”
  • Round Tube Capacity: Size: 1" (.0625") Min. Dia.: 16"
  • Square Tube Capacity: .75" (.0625") Min. Dia.: 12"
  • Solid Round Capacity: Size: .5" Min. Dia.: 5"
  • Flat Bar Easy Way: Size: 1.75" Min. Dia.: 12"
  • Flat Bar Hard Way: Size: 1" Min. Dia.: 8"
  • Angle Iron Capacity: Size: .75" (.125") Min. Dia.: 10"
  • Shaft Diameter: .78"
  • Shaft Center Distance Lower Rolls: 10.88"
  • Upper Roll Dia.: 3.38"
  • Lower Roll Dia.: 3.38”
  • Pinch: Single
  • Power: 110V
  • Shipping Weight: 355 lbs.
  • Material Type: All Specs based on 60,000 PSI (42 Kg/mm 2) Tensile Strength – Mild Steel.
  • Shipping Dimensions: 60" x 44" x 68"
Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

New Metal Forming
New Metal Forming > Tube & Pipe Benders


Powermatic PM2700 Shapers (3HP or 5HP) $5,499.00
JET CS-315, 315mm Ferrous Manual Cold Saw (3 Ph. 230V) $3,716.90
Baileigh CS-350SA, Semi-Automatic Cold Saw $16,311.90
JET VBS-3612, 36" Vertical Metal Bandsaw (2HP, 3Ph, 230/460V) $19,469.99
Baileigh BB-9610H, 96" x 10 Gauge Hydraulic Box & Pan Brake $40,195.00
Powermatic PM2415B, 24" Vertical Bandsaws (5HP, 1 or 3 Phase) $8,895.95
Powermatic TS29 Shaper with Sliding Table $15,399.00
Wilton 2-Axis Precision Angular Vise - 5" Jaw Width, 1-3/4" Jaw Depth $1,011.94
Powermatic 1632, 16" Open End Belt Sander - (5 HP, 1 Ph.) $10,064.00