Home > New Metalworking > Bandsaws - Horizontal >

JET 10" x 16" Horizontal Mitering Bandsaws (J-7020M, & J-7040M)

JET 10" x 16" Horizontal Mitering Bandsaws (J-7020M, & J-7040M)
 
Alternative Views:
JET's  10" x 16" Mitering Horizontal bandsaws unique design features a swiveling head
while the base remains stationary.  This allows the stock to remain
same position while making accurate crosscuts and miters. JET Mitering Bandsaws are built to
last and deliver precision results.

Item# Item Name List Price Our Price Qty Add
414474 J-7020M - 10"x16" Horizontal Mitering Bandsaw (1-1/2HP, 115V, 1PH)
$12,853.50
$10,525.90
414475 J-7040M - 10"x16" Horizontal Mitering Bandsaw (2HP, 115/230V, 3PH)
$12,853.50
$10,525.90
414484 J-7040M-4 - 10"x16" Horizontal Mitering Bandsaw (2HP, 460V, 3PH)
$13,029.50
$10,646.90
Check the items you wish to purchase, then click


Features:
    • Mitering head swivels to cut any angle 0° - 45° while the work piece remains secured
    • Swing away control panel houses major saw controls
    • Variable speed drive system allows the operator to easily fine tune the blade speed
    • Adjustable blade guide with six contact point system that utilizes cam follower
    • bearings mounted on eccentric shafts on both sides of the blades
    • The blade rides on two load bearings mounted on a pivot shaft with the side bearings and carbide pads assisting in distributing the load equally
    • Downfeed system is controlled by a dual system of counterbalance springs working with a hydraulic cylinder
    • Heavy-Duty transmission utilizes hardened and ground gears operating in an oil bath
    • Cast Iron blade wheels
    • Coolant system
    • Adjustable material stop
    • 1" Bi-Metal blade




Technical Specs:
  • Cutting Capacity (W x D) (In.): 10” x 16”

  • Round at 90 Degrees (In.): 10”

  • Round at 45 Degrees (In.): 10”

  • Rectangle at 90 Degrees (In.): 10” x 14” and 2” x 16”

  • Rectangle at 45 Degrees (In.): 8-1/2” x 9”

  • Vise Swivels (Deg.): 45°

  • Head Movement (Deg.): 45°

  • Blade Size (In.): 1” x .035” x 135”

  • Blade Length (In.): 135”

  • Blade Wheel Diameter (In.): 14”

  • Blade Speed (SFPM): 100 - 350

  • Bed Height (In.): 25-1/2”

  • Motor (J-7020M): 1-1/2 HP, 115/230V, 1Ph.
    Motor (J-7040M): 2 HP, 230/460V, 3Ph.
    Motor (J-7040M-4): 2 HP, 460V, 3Ph.

  • Drive: Variable Speed

  • Overall Dimensions (L x W x H) (In.): 76” x 30” x 48”

  • Weight (Lbs.): 1,134 Lbs.





Extended Information:
WARRANTY AND SERVICE
JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools.
Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

New Metalworking > Bandsaws - Horizontal
New Metalworking


Powermatic PM2000B, 10" Tablesaw with Accu-Fence System (3HP, or 5HP) $5,092.00