 |
 |
 |
|
The JET GH-1860ZX is built for shops that demand greater swing capacity, longer turning length, and uncompromising rigidity for heavy industrial applications. With an expanded 18" swing and 60" between centers, this lathe provides the clearance and stability required for large-diameter components, heavy shafts, industrial rollers, and high-mass workpieces.
Powered by a 10HP, 3-phase motor, the GH-1860ZX delivers consistent torque for aggressive roughing cuts and dependable performance under sustained load. The 3.15" spindle bore allows larger material to pass directly through the headstock, reducing secondary operations and improving shop throughput.
The one-piece cast iron base is engineered to dampen vibration and resist flex during heavy cuts, supporting improved surface finish, dimensional accuracy, and repeatable results in demanding environments. Twelve spindle speeds ranging from 261500 RPM provide the flexibility to move from heavy stock removal to precision threading and finishing operations.
- Stock Number: JT1-2714
- Model Number: GH-1860ZX
- Carriage Travel: 35 in.
- Centerline of Spindle to Floor: 9.1 in.
- Compound Slide Travel: 5.9 in.
- Cross Slide Travel: 11.8 in.
- Diametrial Pitch Threads Number: 21
- Distance Between Centers: 60 in.
- Drive Type: Geared Head
- Length of Gap: 7.5 in.
- Maximum Tool Size: 5/8 x 5/8 in.
- Modular Pitch Threads Number: 18
- Modular Pitch Threads Range: 0.3-3.5
- Net Weight: 4,299 Lbs.
- Number of Inch Threads: 45
- Number of Longitudal And Cross Feed Rates: 40/40
- Number of Metric Threads: 39
- Number of Spindle Speeds: 12
- Range Of Cross Feeds: 0.00075 - 0.02 in.
- Range Of Inch Threads Tpi.: 2 - 72 TPI
- Range Of Longitudal Feeds in/rev: 0.0015 - 0.04 in.
- Range Of Spindle Speeds: 26 - 1500 RPM
- Range of Metric Threads: 0.2 - 14 mm
- Reference Type: Base Machine
- SAP Gross Weight: 4,850 Lbs.
- Size: 18 x 60 in.
- Spindle Bore: 3-1/8 in.
- Spindle Mount: D1-8
- Spindle Taper: MT7
- Spindle Taper with Sleeve: MT5
- Style Type: Engine - Large Spindle Bore
- Swing Over Bed: 18 in.
- Swing Over Cross Slide: 12 in.
- Swing Through Gap: 25.6 in.
- Tailstock Spindle Travel: 5 in.
- Taper in Tailstock Spindle: MT4
- Width Of Bed: 12.5 in.
- Motor HP: 10-HP
- Motor Phase: Three Phase
- Motor Voltage: 230 V
JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools.
|
|
|
 |
|
 |
|
|
|
 |
|
 |
|
Features
- Expanded 18" Swing for Larger Workpieces Increased swing capacity allows machining of larger diameter components while maintaining stability and clearance for tooling.
- 60" Between Centers for Long-Part Capability Turn shafts, rollers, and extended cylindrical components in a single setup to reduce repositioning and maintain alignment.
- 10HP Industrial-Grade Torque Delivers the power needed for deep cuts, harder materials, and sustained production environments without bogging down.
- 3.15" Large Spindle Bore Run larger stock through the headstock to minimize re-chucking and secondary operations.
- Rigid One-Piece Cast Iron Construction Heavy cast iron mass absorbs vibration, limits deflection, and supports consistent dimensional accuracy under load.
- Standard Certified Safety Systems UL 987 Certified with integrated foot brake, chuck guard, electronic chuck key holder, and lead screw cover for reinforced operator protection.
- Built for Industrial Uptime Verified prior to shipment and backed by a 2-year parts and labor warranty to support predictable ownership costs.
|
|
|
|
|
|
|
