The 6" Jointer features three auto-set knives that align themselves in the cutterhead for rapid knife changes. Oversized infeed/outfeed tables are mounted on dovetailed ways and have a built-in rabbeting ledge. The fence is 38" in length, with positive stops at 90° and 45° right and left. The fine/quick adjustment lever on the infeed table offers quick set-ups with precision controlled depth of cut. The heavy steel stand features a powerful motor with a non-slip v-belt drive for maximum performance. The 4" dust port offers easy connection to any dust collection system.

• 1HP TEFC Motor
• Two push blocks
• Dust collection port
• Cutterhead guard
• Industrial push-button switch
• Set of three high-speed, heat-treated auto-set steel knives
• Part Number 1791279DXK
• Cutting Capacity (W x D) 6 x 1/2 "
• Cutterhead Speed 6000 RPM
• Cuts Per Minute 18000
• Number of Knives (Helical/Standard) 3
• Standard Knife Size (L x W x T) 6 1/6 x 3/4 x 5/64 "
• Rabbeting Capacity ½ "
• Rabbeting Ledge 9 x 2 1/2 "
• Table Height 31½ "
• Table Size (L x W) 66 x 7 1/4 "
• Infeed Table Length 32½ "
• Outfeed Table Length 32½ "
• Fence Size (L x H) 38 x 4 "
• Fence Tilts 45 ° left, 45 ° right
• Fence Positive Stops 45 ° left, 45 ° and 90 ° right
• Dust Port Outside Diameter 4 "
• Dust Collection Minimum CFM Required 800 cu.ft/min
• Motor Power 1 HP
• Motor Phase 1 Ph
• Motor Voltage 115 / 230 V
• Prewired Voltage 115 V
• Motor Current 13 / 6.5 A
• Model Number 54A
• Brand Powermatic
• Overall Dimensions 66 x 24 x 37-1/2
• Height 37.5 inch
• Width 24 inch
• Length 66 inch
• Net Weight 328 pound

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.