Home > New Metalworking > Bandsaws - Horizontal >

JET 10" X 16" Horizontal Bandsaws (Models J-7020 & J-7040)

JET 10" X 16" Horizontal Bandsaws (Models J-7020 & J-7040)
Alternative Views:

JET's model J-7020 and J-7040 Variable speed drive systems allows the operator to fine tune the blade speed fast and easily. Heavy duty rugged transmission utilizes hardened and ground gears operating in an oil bath. Adjustable blade guides with 6 point contact combination bearing and carbide.

Item# Item Name List Price Our Price Qty Add
414472 J-7020 - 10"x16" Horizontal Bandsaw (1-1/2HP, 115V, 1Ph)
414478 J-7040 - 10"X16" Horizontal Bandsaw (2HP, 230V, 3PH)
414499 J-7040-4 - 10" X16" Horizontal Bandsaw (2HP, 460V, 3PH)
Check the items you wish to purchase, then click

    • For added safety, the J-7020 & J-7040 follows strict guidelines and electrical requirements to be certified by CSA Group
    • Swing away control panel houses major saw controls
    • Variable speed drive system allows the operator to easily fine tune the blade speed
    • Adjustable
    • blade guide with six contact point system that utilizes cam follower
    • bearings mounted on eccentric shafts on both sides of the blades
    • Heavy-Duty transmission utilizes hardened and ground gears operating in an oil bath
    • Patented 3-Jaw vise with rapid action moveable jaw for faster set up
    • One-piece wheel cover
    • Coolant system
    • Cast iron blade wheels
    • Adjustable material stop
    • 1" Bi-metal blade

Technical Specs:
  • Cutting Capacity (W x D) (In.): 10” x 16”
  • Round at 90 Degrees (In.): 10”

  • Round at 45 Degrees (In.): 10”

  • Rectangle at 90 Degrees (In.): 10” x 10” and 7” x 16”

  • Rectangle at 45 Degrees (In.): 6-1/2” x 11”

  • Vise Swivels (Deg.): 45°

  • Blade Speeds (SFPM): 100 – 350 SFPM

  • Blade Wheel Diameter (In.): 14”

  • Blade Length (In.): 135”

  • Blade Size (In.): 1” x .035” x 135”

  • Bed Height (In.): 23-1/2”

  • Motor (Model J-7020): 1-1/2 HP, 115/230V, 1Ph
    Motor (Model J-7040): 2 HP, 230V, 3Ph
    Motor (Model J-7040-4): 2 HP, 460V, 3Ph

  • Weight (Lbs.): 927 Lbs.

  • Overall Dimensions (L x W x H) (In.): 75-1/2 x 33 x 41

Extended Information:
JET Tools warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Industries Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your JET or Wilton tools.

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

New Metalworking > Bandsaws - Horizontal
New Metalworking