• (2) Cast Iron Extension Wings

• (1) Miter Gauge

• (1) Dust Collection Blade Guard

• (1) Riving Knife

• (2) Blade Wrenches

• (1) Push Stick

• (1) 10” Blade

• (1) Standard Brake Cartridge

• (1) Owner’s Manual

• (2) Hardware Packs

• (1) 3mm Hex Key

• (1) 5mm Hex Key

• (1) 8mm Hex Key

• (1) Blade Spacing Adjustment Gauge

• Motor: (all 60Hz, TEFC): 3.0HP, 5.0HP & 7.5HP Motors available

• Cabinet footprint: 20″ w x 25″ d

• Cast iron table: 24″ w x 30″ d

• Cast iron table (w/ extension wings): 44″ w x 30″ d

• Extension wings: 10" w x 30" d each

• Extension table 36 in rails: 24″ w x 30″ d

• Extension table 52 in rails: 40″ w x 30″ d

• Weights - w/ 36 in fence systems: 635 lbs

• Weights - w/ 52 in fence systems: 685 lbs

• Shipping weight (approx.): 640 lb (table saw only)

• Blade: Prof. grade, 5/8″ arbor

• Blade diameter: 10"

• Blade tilt: Left

• Max. depth of cut, blade at 0º: 3-1/8″

• Max. depth of cut, blade at 45º: 2-1/4″

• Max. rip, right of blade - 36 in: 36-1/2″ (w/ optional 36″ rails)

• Max. rip, right of blade - 52 in: 52-1/2″ (w/ optional 52″ rails)

• Max. rip, left of blade: 12-1/2″

• Dado diameter: 8″ (requires a separate brake cartridge and insert)

• Dado max. width: 13/16″

• Arbor diameter at blade: 5/8″

• Main bearing size: 62mm OD x 30mm ID

• Second bearing size: 52mm OD x 25mm ID

• Table in front of blade (max. elevation): 10-3/4″

• Table behind blade (max. elevation): 10″

• Arbor Runout: 0.001″ Maximum allowable runout

• Table flatness measured diagonally: 0.010″ Maximum gap

• Blade alignment with miter slot: 0.010″ Maximum displacement

• Deviation of miter gauge indexing stops from actual: ±0.25º

• Alignment between splitter and blade: 0.010″ Maximum difference

• Miter slots T-shaped: 3/4″ at top, 1″ at bottom, 3/8″ deep

• Miter slots center: 11-1/8″ center-to-center

• Miter slots info: 5-1/2″ (arbor flange to center of right slot)

• Dust collection port diameter: 4"

• Blade guard (dust collection): polycarbonate, extends only 1-3/16" to right of blade

• Blade guard (dust collection) port diameter: 1-1/2" Outside, 1-1/4" Inside

• Insert: zero clearance, phenolic core, melamine surfaces

• Hand wheels: 8″ diameter, cast iron w/ chrome handle

• Belts: 2 V-ribbed belts

• Overall saw dimensions: 44″ w x 34″ d x 34″ h

• Overall saw dimensions 36 in: 69 1/4″ w x 36 1/2″ d x 34″ h

• Overall saw dimensions 52 in: 85 1/4″ w x 36 1/2″ d x 34″ h

• Motor configuration 1: ICS31230: 3 hp, 1 phase, 230V, 13 A

• Motor configuration 2: ICS51230: 5 hp, 1 phase, 230V, 19.7 A

• Motor configuration 3: ICS53230: 5 hp, 3 phase, 230V, 12 A

• Motor configuration 4: ICS53480: 5 hp, 3 phase, 480V, 5.8 A

• Motor configuration 5: ICS53600: 5 hp, 3 phase, 600V, 4.8 A

• Motor configuration 6: ICS73230:7.5 hp, 3phase, 230V,17.8 A

• Motor configuration 7: ICS73480: 7.5 hp, 3 phase, 480V, 9 A

• Motor configuration 8: ICS73600:7.5 hp, 3 phase, 600V, 6.9 A

WARRANTY INFORMATION:
SawStop warrants to the original retail purchaser of a new contractor saw from an authorized SawStop distributor that the saw will be free from defects in material and workmanship for ONE YEAR from the date of purchase.

SawStop warrants to the original retail purchaser of a refurbished, demonstration or floor model contractor saw from an authorized SawStop distributor that the saw will be free from defects in material and workmanship for SIX MONTHS from the date of purchase.

This warranty does not apply to defects arising from misuse, abuse, negligence, accidents, normal wear-and-tear, unauthorized repair or alteration, or lack of maintenance. This warranty is void if the saw or any portion of the saw is modified without the prior written permission of SawStop, LLC, or if the saw is located or has been operated outside of the country where the authorized SawStop distributor from whom the saw was purchased resides.