The Powermatic 209BHH-3 is a 20-inch stationary thickness planer built specifically for woodworking production environments equipped with three-phase power. The 209BHH-3 (model PM1-479) is powered by a 5 HP, three-phase motor that ships 230V-wired from the factory and is field-convertible to 460V, making it compatible with a wide range of commercial and industrial electrical configurations. Its 20-inch cutting width and 8-inch maximum board thickness capacity enable high-throughput processing of wide panels and heavy stock. The four-row helical cutterhead carries 68 four-sided carbide inserts operating at 5,200 RPM, producing a consistent, professional surface finish with reduced noise and tearout; individual insert access allows fast rotation or replacement to minimize production downtime. An integrated digital readout (DRO) provides exact, repeatable thickness control, and two feed speeds, 16 FPM and 28 FPM, let operators balance finish quality and throughput based on material and schedule demands. Solid cast iron infeed and outfeed tables span a combined 51-1/2-inch surface, delivering the rigidity and vibration damping required for consistent results at production volumes. A 4-inch bi-directional dust port with a 900 CFM minimum requirement maintains effective chip management, and an oversized emergency stop with upgraded caster locking and braking system supports operator safety in high-use environments.

• Stock Number: PM1-479
• Model Number: 209BHH-3
• Coating: None
• Cutterhead Diameter: 3-1/4"
• Cutterhead Speed (RPM): 5200 RPM
• Digital Readout: Yes
• Dust Port Outside Diameter (in.): 4 in.
• Feed Rate: 16/28 FPM
• Gross Weight: 704 lbs.
• Input Power: 230/460V, 3-Phase
• Knife Size: 0.59 in. x 0.59 in. x 0.10 in.
• Max. Board Thickness: 8 in.
• Maximum Full Width Depth of Cut: 3/32 in.
• Motor Amps: 20 A
• Motor HP: 5 HP
• Motor Phase: 3-Phase
• Net weight: 606 lbs.
• Number of Knives: 68 Knives
• Number of Speeds: 2 Speeds
• Prewired Voltage: 230-460V
• Recommended Circuit Size Amp: 40 A
• Required Cfm: 900 CFM
• Style Type: Floor Standing
• Table Height: Manually Adjusted
• Table Material: Cast Iron
• Table Size (in.): 51.5 in. x 33.5 in.
• Type of Cutterhead: Helical Head

WARRANTY AND SERVICE JPW Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your POWERMATIC® tools.