*FREE SHIPPING*
on all orders over $250

This means you do not pay
any extra fees no matter what.
 No Residential or Liftgate Fees!









 
 
 
     FOLLOW US...
           
 
 
 
 
 
 
 
 
 
 
 
 



You are here:Home > New Metal Forming > Brakes
Sort By:
Page of 3
Baileigh BB-3616E, 36" x 16 Gauge Box & Pan Brake
Baileigh BB-3616E, 36" x 16 Gauge Box & Pan Brake
Our Price: $995.00

The large robust sheet metal brakes that most metal fabrication shops haves might be to difficult to operate when working with short pieces of sheet metal.  That is where the BB-3616E finger brake fits in, its small size allows for easier operation while not sacrificing on quality.  It is a Baileigh Industrial sheet metal brake, so it is built to the best standards, but at an economical price point that will not break the bank, just sheet metal.

The BB-3616E sheet metal bender has an assortment of 10 fingers to allow for fabricating various depths and sizes of boxes and pans out of sheet metal that is 16 gauge mild steel or thinner sheet metal.  This finger brake’s heavy-duty construction consists of plate steel and an electro welded frame work that allows for crisp bend angles even at the middle of the beam at full capacity.

This finger brake has a heavy counter weight to assist lifting the apron, which comes in handy when bending at full capacity.  There is a finger gap adjustment on the right and left of the bend brake to allow for different gauges of material.
Baileigh BB-4816E, 48" x 16 Gauge Box & Pan Brake
Baileigh BB-4816E, 48" x 16 Gauge Box & Pan Brake
Our Price: $1,385.00

This brake is perfect for fabricators on a budget, but do not what to sacrifice quality in the bend just because of the lower price.  The BB-4816E is made to Baileigh Industrial standards and will provide years of trouble free use.  For added rigidity the framework on the BB-4816E is made from fully welded steel plate.

At maximum capacity this box and pan brake can bend up to 16 gauge mild steel sheet metal up to 48" wide. A counter weight apron lift assist gives the operator a break when bending at full capacity. The BB-4816E sheet metal brake also comes standard with a gap adjustment, 16 hardened fingers of varying lengths and a sturdy floor stand.
Bleigh BB-4816, 48" x 16 Gauge Box & Pan Brake
Bleigh BB-4816, 48" x 16 Gauge Box & Pan Brake
Our Price: $1,975.00

The BB-4816 sheet metal brake uses a fully welded main beam and apron for maximum rigidity and lessens the chances of deformation to the material being bent.  The BB-4816 was designed to accept 48” wide sheets of 16 gauge mild steel sheet metal and bend them to perfect angles every time.   To assist with bending at full capacity the BB-4816 box and pan brake includes a heavy duty counter balance weight; this weight will save time and energy for the operator.

The BB-4816 can be bench mounted or can be permanently place upon the included heavy duty stand.  16 hardened fingers of different lengths are also included to assist in fabricating as many different sizes of boxes and pans imaginable.
Baileigh BB-4012F, 40" x 12 Gauge Box & Pan Brake with Foot Clamp
Baileigh BB-4012F, 40" x 12 Gauge Box & Pan Brake with Foot Clamp
Our Price: $2,295.00

Baileigh Industrial’s BB-4012F finger brake allows the operator to clamp the material with his/her foot, so both hands are free for perfect positioning of the sheet metal before clamping the material in place.

Although different from other sheet metal brakes on the market, the BB-4012F is definitely a Baileigh Industrial machine built form the best possible components.  The BB-4012F finger brake comes standard with fingers in an assortment of different widths to accommodate bending various sizes and shapes of tanks, pans, boxes and much more. Another nice feature of the BB-4012F box and pan brake is an easy to adjust gap adjustment, this is important to get a correct bend when braking various gauges of sheet metal.  A spring loaded cylinder assists lifting the apron which gives assistance to the operator when bending at full capacity, which is an impressive 12 gauge mild steel at a full 40 inches.  The BB-4012F sheet metal brake also features hardened fingers and bending die for long life and years for use.  An adjustable stop rod rounds out the list of features for the BB-4012F.
Baileigh BB-5014F-DS, 50" x 14 Gauge Box & Pan Brake with Foot Clamp
Baileigh BB-5014F-DS, 50" x 14 Gauge Box & Pan Brake with Foot Clamp
Our Price: $2,595.00

Doing a full width sheet metal bend on a standard box and pan brake can be difficult if you are by yourself, ever wish you had an extra hand to help?  Baileigh Industrial’s BB-5014F finger brake allows the operator to clamp the material with his/her foot, so both hands are free for perfect positioning of the sheet metal before clamping the material in place.

The BB-5014F finger brake model comes standard with an assortment of different width fingers to accommodate bending up the various sizes and shapes of tanks, pans, boxes and much more. Also included with the BB-5014F is an easy to adjust gap adjustment for various gauges of sheet metal.  A spring loaded cylinder assists lifting the apron which gives assistance to the operator when bending at full capacity, which is an impressive 14 gauge at a full 50 inches.  The BB-5014F sheet metal brake also features hardened fingers and bending die for long life and years for use.  An adjustable stop rod rounds out the list of features for the BB-5014F.
Baileigh BB-4816M, 48" x 16 Gauge Magnetic Box & Pan Brake
Baileigh BB-4816M, 48" x 16 Gauge Magnetic Box & Pan Brake
Our Price: $2,795.00

The BB-4816M magnetic sheet metal brake is a unique box and pan brake that has endless bending possibilities when compared to conventional sheet metal brakes.  Requiring a common 220 volt, single phase power supply this folding machine can bend boxes or pans to almost any depth since it isn't reliant on conventional finger depths.  A powerful magnet in the bending bed can be engaged by foot pedal or push button control to hold down a mild steel clamping bar of almost any configuration across the bed width or bed length.  The sheet metal is pinned between the magnetic mild steel clamping bar, at this point the bottom bending leaf can be lifted to complete the bend.

The mild steel clamping bar can be made of straight bars (of various widths if you had very tight boxes to make) for straight bends or segmented clamping bars for box and pan applications of any other configuration. Again, because of the unique design the operator is not limited to the depth of the item since you are no longer limited by finger length.

Our BB-4816M magnetic sheet metal brake can bend (items impossible for traditional box and pan brakes) totally enclosed boxes, triangles, alternate bends on varying planes, round items such as scrolling applications, and much more.  This bending machine is perfect for bending sheets of mild steel, stainless steel, aluminum, coated materials, heated plastics, and much more.

The bottom leaf's bending extension can be removed for the tightest bend dimension between bends of 5/8".  A scaled stroke angle control can be set for repeatable bends time after time.  This magnetic box and pan brake comes with product supports and adjustable back gauges for production runs, as well as a simple to use gap adjustments on the standard clamping bars for different sheet metal thicknesses.
Baileigh BB-4814, 48" x 14 Gauge Box & Pan Brake
Baileigh BB-4814, 48" x 14 Gauge Box & Pan Brake
Our Price: $2,849.00

The BB-4814 box and pan brake is a great value for any shop looking for a heavy duty 4’ sheet metal brake. Designed to be an economic alternative to our 12 gauge sheet metal line of finger brakes, the BB-4814 boasts an impressive 14 gauge mild steel maximum capacity.  The BB-4814 sheet metal brake has the same fully welded framework as the rest of our line, assuring no deformation of the machine when bending at full capacity.

To assist with bending at full capacity the BB-4814 box and pan brake includes two heavy duty counter balance weights.  These weights will save time and energy for the operator.  The BB-4814 sheet metal brake includes 9 hardened fingers of varying sizes that allow boxes and pans of many different dimensions to be fabricated with a maximum box depth of 4”.   An integrated stand, that is reinforced and positioned for optimum balance, rounds out the list of features on the BB-4814 finger brake.
Baileigh BB-5016F-DS, 50" x 16 Gauge Reversible Box & Pan Brake with Foot Clamp
Baileigh BB-5016F-DS, 50" x 16 Gauge Reversible Box & Pan Brake with Foot Clamp
Our Price: $2,849.00

Sometimes there are jobs that require a unique bend that a standard box and pan brake will not allow you to do.  The BB-5016F-DS can take care of those issues.  It incorporates segmented fingers on the top beam to accommodate bending up the various sizes and shapes of tanks, pans, boxes and much more.  The BB-5016F-DS also has those same segmented fingers on the lower lifting beam to allow for flanges and flaps to hang down while still allowing you to get close to the bend line. The BB-5016F-DS sheet metal brake also features hardened fingers and bending die for long life and years for use.

Another nice feature of Baileigh Industrial’s BB-5016F-DS reversible finger brake allows the operator to clamp the material with his/her foot, so both hands are free for perfect positioning of the sheet metal before clamping the material in place.   Also included with the BB-5016-DSF, is an easy to adjust gap adjustment for various gauges of sheet metal.  A spring loaded cylinder assists lifting the apron which gives assistance to the operator when bending at full capacity, which is an impressive 16 gauge at a full 50 inches.    An adjustable stop rod rounds out the list of features for the BB-5016F-DS.
Baileigh BB-4812, 48" x 12 Gauge Box & Pan Brake
Baileigh BB-4812, 48" x 12 Gauge Box & Pan Brake
Our Price: $6,295.00

The fully welded framework, supported by solid steel adjustable trusses, allow the BB-4812 sheet metal brake to bend 12 gauge mild steel sheet metal over the entire 48” length.  The BB-4812 weighs in at just less than 2000lbs, truly making it one heavy duty sheet metal brake.

The BB-4812 finger brake comes standard with 11 hardened and polished 3 piece fingers of varying lengths that allow the operator to configure the sheet metal brake in any way possible. Because of the three piece design, the box depth of the BB-4812 is 6’ one of the largest on the market. The heavy duty apron on the BB-4812 has an integrated stop rod for repeatability.  Also included is a pair of heavy counter weights to assist the operator in the bending of 12 gauge sheet metal.

As you can see, like most Baileigh Industrial equipment, the BB-4812 is built to offer years of service and is typically in stock for quick deliveries.
Baileigh BB-7216M, 72" x 16 Gauge Magnetic Box & Pan Brake
Baileigh BB-7216M, 72" x 16 Gauge Magnetic Box & Pan Brake
Our Price: $6,695.00

The BB-7216M has over 78 inches of bendable area, which will allow the operator to get even more creative with the uses for this sheet metal brake. Operating on 220 volts, the BB-7216M uses a heady duty magnet to clamp the material between itself and the bending “clamp bar” or finger.  Because the BB-7216M sheet metal brake uses a magnet to hold the material and “clamp bar” the operator is not required to use the supplied bars.  This opens up a world of possibilities and applications that are just not possible with traditional box and pan brakes.  Totally enclosed boxes, triangles, alternate bends on varying planes, round items such as scrolling applications, and much more are now possible.

Once you start using the BB-7216M magnetic box and pan brake there will be no turning back.  It’s one of the easiest box and pan brakes to operate on the market.  To initiate a bend on the BB-7216M magnetic brake simply put a piece of material between the clamping bar to the depth required, hit the foot pedal control that softly clamps the material, allowing for any repositioning, once ready, lifting the leaf arms engages full magnetic power (6 tons) holding the material in place as the leaf arm makes the appropriate bend.  One of the biggest advantages of this type of box and pan brake is that the magnetic power of 6 tons is consistent across the entire beam allowing for very crisp bends even in the middle of the machine.
   
 
Metal Forming Catagories
Newsletter

Sign up for our newsletter: