This new heavy-duty JET Shaper is available with a powerful 3HP, 1Ph motor with magnetic controls. The four-speed 4000, 6000, 8000, 10000 RPM step pulley drive with quick release lever allows you to select the best speed and torque for different cutter diameters.

• Part Number 708323
• Spindle Speed 4000, 6000, 8000 and 10,000 RPM
• Reversable Yes
• Spindle Diameter 1 1/4 "
• Spindle Size Under Nut 4 "
• Spindle Travel 4
• Tilting Spindle n.a.
• Table Size 26 3/4 x 32 1/4 "
• Table Height From Floor 33.25 "
• Table T-Slot 3/4 x 3/8 "
• Table Opening Diameter 6 19/64 "
• Table Insert Opening Diameter 2 9/16 and 4 5/16 “
• Fence Size (L x H) 4 3/4 x 16 "
• Fence Travel (Major and Minor) 4 and 1 "
• Slide Table Size (L x W) n.a.
• Table Travel n.a.
• Table Inserts 2
• Maximum Diameter Cutter Below Table 6 "
• Maximum Diameter Cutter Above Table 7½ "
• Router Bit Collet Diameter 1/4 and 1/2 " (optional)
• Dust Port Outside Diameter 4 "
• Dust Collection Minimum CFM Required 400 cu.ft/min
• Electrical Controls - Magnetic Starter Yes
• Digital Readouts n.a.
• Motor Power 3 HP
• Motor Voltage 230 V
• Prewired Voltage 230 V
• Motor Current 14 A
• Motor Phase 1 Ph
• Model Number JWS-35X3-1
• Brand Jet
• Height 41 inch
• Width 40 inch
• Length 30 inch
• Net Weight 473 pound

WARRANTY AND SERVICE

JPW Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these JPW Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools.