At Powermatic, we know our woodworkers’ expectations are high when it comes to their machines. With that in mind, when we engineer a new product, we are continuously working to improve the woodworker’s capabilities while simultaneously enhancing their experience. That is why we are proud to introduce the PM2244 Drum Sander. The PM2244 will exceed your expectations with its world-class design, usability and sophistication.

• Drum Length (In.): 22"
• Number of Sanding Drums 1
• Drum Speed (RPM): 1,720 RPM
• Drum Diameter (In.): 5"
• Conveyor Motor (HP): 1/30 HP
• Conveyor Speed (FPM): variable 0 - 10 FPM
• Maximum Board Thickness (In.): 4"
• Maximum Board Width (In.): 44"
• Minimum Board Length (In.): 2-3/8"
• Minimum Board Thickness (In.): 1/32"
• Dust Collection Minimum CFM Required (CFM): 800 CFM
• Dust Port Outside Diameter (In.): 4"
• Motor Power (HP): 1-3/4 HP
• Motor Phase: 1 Ph.
• Motor Voltage (V.): 115V only
• Motor Current (Amps): 14
• Recommended Circuit Size (Amps.): 20

WARRANTY AND SERVICE

WMH Tool Group, Inc., warrants every product it sells. If one of our tools needs service or repair, one of our Authorized Service Centers located throughout the United States can give you quick service. In most cases, any of these WMH Tool Group Authorized Service Centers can authorize warranty repair, assist you in obtaining parts, or perform routine maintenance and major repair on your Jet® tools.